The Ultimatum Deadline

Click HERE to purchase

FEATURES
	Remington 700 Footprint and Trigger Interface With a Remington 700 footprint and trigger interface, many stocks/chassis and trigger options are available.
	Sturdy Rear Tang A sturdy rear tang ensures that the action is seated properly in the chassis/stock and that the action remains as stiff and true as possible. This helps to maintain accuracy.
	20 MOA Aluminium Picatinny Rail Deigned to handle the heaviest of optics on the market, the rail features 6x #8-40 mounting screws and 2 dowel pins. Offering the benefits of an integral rail, but with the versatility to choose different rail cants. Also available "flush" to the front of the receiver.
	Minimal Ejection Port The action uses a minimally sized ejection port with an internal undercut in order to maximize the strength and stiffness, while maintaining the ability to eject unfired cartridges.
	Removable Floating 3 Lug Bolt Head The floating bolt head design ensures that the bolt face is always perfectly aligned with the axis of the bore, further helping accuracy. The bolt head is also removable and replaceable meaning that caliber changes are made easy and quick. It comes standard with our dual ejector system.
	4340 Steel Construction with Liquid Hard Nitride Coating 4340 HTSR steel is used for the action housing. The hard nitride improves wear, corrosion and chemical resistance. Surface hardness is also improved with the hard nitride finish.
	Gas Blocking Shroud with Anti-rotational Lock System The shroud to action housing fitment acts as a "wall", restricting any residual blow-back gases. The notch at the top of the bolt shroud locks rotational forces during cocking, minimizing friction to allow a lighter bolt lift.
	1-1/16″ x 20 Barrel Threads The Ultimatum Action uses a 1-1/16″ x 20 threads. It is designed to accept savage pre-fit small shank barrels. A Barrel machined to proper specs can also be mounted in a similar manner to the remington 700 setup.
	Integral Recoil Lug The recoil lug is machined into the action to maximize strength and to provide additional thread interface to the barrel. It is 5/16" thick.
	AICS and AW magazine compatible The feed port was designed to accept AICS and AW style magazines.
	60 Degree Bolt Throw With a 3 lug design, the bolt throw can be kept to 60 degrees, ensuring quick operation.
	Battery Safety The firing pin can only protrude the bolt face if the lugs are locked and in battery. This safety mechanism ensures that if the bolt head is not properly installed, the rifle does not fire.

Click HERE to purchase