Do you have a 338 Lapua Mag. action?
We are working on a 338LM action. It should be available for spring 2017.
Will your action work with AW style Magazines?
Our action is designed to work with AICS style magazines only. We are working on a version that will use AW magazines
How long is the feed port on the short action
It is 3.040″ long.
What is the weight of the action?
The short action weighs 2.2 lbs (1kg).
Will the action fit my aftermarket remington 700 chassis/stock?
It will. Depending on the chassis/stock/bottom metal, some small adjustments might be needed:
1-We use a trigger hanger; your trigger will sit 1mm lower. Therefore, trimming might be needed to assure clearance for the safety
2-The bolt body on our action is larger than the one on a R700. The magazine catch will need to be shortened to let the magazine sit at the right height. A chassis using AR-15 buttstocks might need additional clearance on the portion behind the rear tang.
Does your action only work with a barrel nut?
No. The barrel nut is meant to be used with pre-fit barrels. A barrel can be mounted without a barrel nut, in which case it needs to be machined properly for the action (threaded and chambered). Always get a qualified gunsmith to do the work for you.
Will a Savage barrel nut wrench work on your barrel nut?
It will not. Our barrel nut was designed to be used with our barrel nut wrench.